Agricultural Baler Gearbox

Agricultural Baler Gearbox
Details:
The XH100 baler gearbox has two separately identified output paths in its technical sheet. Output I is listed with ratio alternatives of 6.87:1 and 5.83:1, continuous torque of 3600 Nm and peak torque of 7000 Nm. Output II has a 1.15:1 ratio, 600 Nm continuous torque and 1100 Nm peak torque.
The catalogue specifies 50 HP and 540 rpm input for this baler arrangement. Its dimensioned views show the input shaft, both outputs and the mounting geometry. These separate output ratings give a clearer description of the transmission than a single torque value assigned to the entire gearbox. The baler configuration should also be distinguished from other agricultural gearboxes that share the XH100 family designation.
Send Inquiry
Description
Send Inquiry

Key Features

 

  • Two outputs have separately published ratios and torque ratings.
  • The original baler sheet defines the input and both output connections.
  • Continuous and peak torque values are retained as separate specifications.

 

Product Applications

 

This XH100 arrangement is documented for an agricultural baler. It provides the illustrated drive paths within the baler transmission, with output I and output II carrying their own listed ratios and ratings. Equipment builders should identify the connected function at each output and compare the required interfaces with the technical drawing. The specification does not establish a particular bale size or the production capacity of a complete baler.

 

Technical Specifications

 

Parameter

Baler catalogue specification

Model family

XH100 baler arrangement

Application

Agricultural baler

Input power

50 HP

Input speed

540 rpm

Output I ratios

6.87:1 / 5.83:1

Output I continuous torque

3600 Nm

Output I peak torque

7000 Nm

Output II ratio

1.15:1

Output II continuous torque

600 Nm

Output II peak torque

1100 Nm

Shaft details

Original drawing gives separate input, output I and output II spline forms

Related product page references

XH100.687J.00 and XH100.583J.00. The catalogue specification above describes the baler arrangement and its two output ratings.

 

Product Design

 

The drawing labels input, output I and output II and includes configuration-specific spline details. Each output must be considered with its own torque rating. A baler design or replacement specification should preserve those labels and the associated interfaces when translating the sheet into an installation layout.

 

 

Original Technical Sheet

 

JCTT FEEDING MACHINERY PLANETARY GEARBOX.pdf | PDF page 19 | Configuration codes and dimensions remain as published

product-1684-2382

 

 

Frequently Asked Questions

 

Q: How should an XH100 baler sample be requested?

A: Identify the required output I ratio and both connected output interfaces. Include the baler layout so the sample enquiry can specify the two drive paths shown in the catalogue.

Q: What should an OEM state about output II?

A: Provide the required mating connection and operating relationship for that output. Its published 600 Nm continuous torque belongs to output II and should remain separate from the 3600 Nm output I rating.

Q: Can an alternative main ratio be reviewed for a baler?

A: The catalogue lists 6.87:1 and 5.83:1 for output I. State the required ratio and shaft interfaces; an unlisted ratio or changed connection requires a separate technical response.

Q: What should a baler gearbox inspection report distinguish?

A: Identify the output being checked, its selected ratio and the relevant spline. A load test request should distinguish continuous duty from peak torque and include the intended operating condition.

Q: Which details help with after sales support on a two output unit?

A: State which output is affected and provide the full gearbox marking, photographs and baler transmission layout. Include the input speed and selected main ratio so support can review the correct drive path.

 

Enquiry Information

 

Include the complete model and configuration, machine application, selected ratio, input speed and mating component drawings with an enquiry. Sample supply, OEM identification, customization scope, inspection documents and service arrangements are addressed in the quotation or order agreement for the specified configuration.

 

 

Hot Tags: agricultural baler gearbox, China, manufacturers, suppliers, factory, wholesale, quotation, bulk, made in China

Send Inquiry