Key Features
- Output I ratio choices are 16.70, 21.70, 24.86 and 32.31.
- Output II is identified for a pump and has a listed ratio of 1:3.68.
- The technical drawing includes separate output interfaces and flange geometry.
Product Applications

XHG03 is presented for a 16 cubic metre horizontal TMR mixer. Its role is to transmit the tractor drive to the mixing mechanism while providing the illustrated auxiliary pump connection. An equipment enquiry should identify the mixer drive and pump requirements separately so that the chosen ratio, connection and operating duty correspond to the actual machine. The main and auxiliary outputs should each be specified using their own connection details.
Technical Specifications
|
Parameter |
Catalogue specification |
|
Model |
XHG03 |
|
Application reference |
TMR mixer, 16 m³ |
|
Input speed |
540 rpm |
|
Continuous torque |
30,000 Nm |
|
Peak torque |
50,000 Nm |
|
Output I ratios |
16.70 / 21.70 / 24.86 / 32.31 |
|
Output II ratio |
1:3.68 |
|
PTO shaft |
1 inch 3/8 z6 |
|
Additional drawing references |
Output I: DIN 5482 100 x 94; output II: DIN 5482 35 x 31 |
Products Description
The drawing identifies input, output I and output II for a pump. It also shows the flange pattern and spline designations. These distinct connections are part of the XHG03 arrangement and should remain clearly identified in an installation drawing or an OEM specification.
Original Technical Sheet
JCTT FEEDING MACHINERY PLANETARY GEARBOX.pdf | PDF page 17 | Configuration codes and dimensions remain as published


Frequently Asked Questions
Q: How can a sample be specified for a horizontal TMR mixer?
A: State the mixer volume, main output ratio and pump connection requirements. Include the existing gearbox photographs so that the proposed XHG03 sample can be compared against both output interfaces before the quotation is finalized.
Q: What does an OEM enquiry need for the auxiliary output?
A: Identify the pump shaft connection, drive direction and required operating speed separately from the mixer drive. The main output torque rating should not be used as an auxiliary pump rating.
Q: Are all four output I ratios part of one unit?
A: The sheet lists alternative ratio values. It does not establish that every ratio is selectable within a single supplied gearbox. Specify the required operating arrangement and obtain the configuration drawing with the quotation.
Q: What inspection evidence should be requested?
A: Request confirmation of the main ratio, auxiliary ratio, PTO spline and output flange. If the project needs torque testing or a report, define the test load and acceptance requirements in the purchase specification.
Q: What helps diagnose a mixer or pump drive problem?
A: Identify which output is affected, then supply the gearbox identification, selected ratio, input speed and photographs. Information about the pump and mixing mechanism helps direct the review to the correct drive path.
Enquiry Information
Include the complete model and configuration, machine application, selected ratio, input speed and mating component drawings with an enquiry. Sample supply, OEM identification, customization scope, inspection documents and service arrangements are addressed in the quotation or order agreement for the specified configuration.
Hot Tags: horizontal feed mixer gearbox, China, manufacturers, suppliers, factory, wholesale, quotation, bulk, made in China
