Product Applications
When replacing an installed gearbox, read the nameplate and compare the gear arrangement symbol before checking the shaft ends. The catalogue drawing gives a 1 3/8 inch Z6 X spline. The related .03W has arrangement B. If a different implement uses an apparently similar housing, request its application drawing to establish the correct gearbox and mounting arrangement.
Technical Specifications
|
Parameter |
Catalogue specification |
|
Model |
XH30.290Z.01W |
|
Application |
Heavy side mounted mower |
|
Power and input |
30 HP at 540 rpm |
|
Ratio and output torque |
1:2.9 and 130 Nm |
|
X spline and gear arrangement |
1 3/8 in Z6, A |
|
Website weight |
16 kg |
The technical sheet identifies the application and configuration shown here.
Original Technical Drawing
JCTT Agricultural Gearbox Selection Manual | PDF page 21

Frequently Asked Questions
Q: Can an unmarked gearbox be matched from a sample?
A: Send photographs of the existing unit from the input, output and mounting sides. Include the measured shaft geometry and the required ratio so the enquiry can be compared against the .01W drawing and arrangement.
Q: How should the replacement arrangement be recorded on an OEM parts list?
A: List XH30.290Z.01W, arrangement A and the drawing revision used for the interface. Retain the ratio with the complete code to make the parts reference useful when purchasing a replacement.
Q: What is needed to review a unit with a modified mounting bracket?
A: Provide the current bracket drawing and the required shaft axis location. Include the parts that mate to the gearbox so the mounting change can be considered together with shaft engagement and alignment.
Q: How can I specify a rotation check for a replacement?
A: State the required input and output rotation and identify the viewing direction for each shaft. Use the arrangement A symbol on the catalogue sheet to identify the configuration referenced in the inspection request.
Q: What information is helpful if the old gearbox label is damaged?
A: Share the readable part of the label, photographs of the connections and a view of the complete machine. Add the known input speed and existing ratio if available, along with the dimensions of the mating components.
Hot Tags: rotary tiller gearbox, China, manufacturers, suppliers, factory, wholesale, quotation, bulk, made in China

