TMR Vertical Mixer Gearbox

TMR Vertical Mixer Gearbox
Details:
The XHG06 TMR Vertical Mixer Gearbox is a planetary reduction gearbox for vertical total mixed ration feed mixers. It transfers power from the machine drive to the vertical mixing mechanism, reducing rotational speed for the mixing process. The XHG06 model brings together a choice of reduction ratios, two torque rating combinations and single or double PTO shaft arrangements within one product family.
For equipment manufacturers selecting a drive for a 20 m³ vertical mixer, the XHG06 provides a defined starting point for matching mixer capacity, transmission ratio and shaft connection. Its maximum input speed is 1,000 rpm. The available ratios are 8.2, 9.6, 15, 17.7, 29.2 and 34.3, giving designers several reduction options when coordinating the gearbox with the machine's input drive and required mixing speed.
Send Inquiry
Description
Send Inquiry

Key Features

 

  • Two torque combinations: 30,000 N·m continuous with 60,000 N·m peak, or 40,000 N·m continuous with 80,000 N·m peak. Each combination retains separate continuous and peak ratings for drive selection.
  • Six reduction ratios within the XHG06 family allow the transmission to be selected around the operating speed required by the mixer.
  • Single and double PTO shaft arrangements are available, with a 1 3/4-inch, 20-tooth shaft specification. The shaft arrangement is selected to suit the machine's power transmission layout.

 

Technical Specifications

 

 

Parameter

Specification

Model

XHG06

Gearbox type

Vertical planetary gearbox

Continuous torque options

30,000 / 40,000 N·m

Peak torque options

60,000 / 80,000 N·m, respectively

Transmission ratios

8.2 / 9.6 / 15 / 17.7 / 29.2 / 34.3

Maximum input speed

1,000 rpm

PTO shafts

single / double; 1 3/4 inch z20

Recommended mixer capacity

Single auger: 20 m³; two augers: 40 m³; three augers: 50 m³

 

Applications

 

Applications

 

Applications include vertical TMR feed mixing equipment and biogas machines. The gearbox forms part of the mixing drive rather than the feed formulation or material handling system. Mixer manufacturers can use the capacity, torque and ratio information together when specifying the transmission for a complete machine.

 

Product Application

 

The XHG06 is designed for vertical TMR mixer drives and is also identified for biogas mixing. In a mixer installation, the planetary gearbox connects the machine drive to the vertical mixing mechanism and reduces speed before power reaches the auger system. The catalogue selection guide covers single-, twin- and three-auger layouts, with capacity references up to 50 m³. Two torque rating combinations and a range of reduction ratios are listed for the model family, along with single- or double-PTO arrangements. These options help equipment builders configure the drive around the mixer layout and power connection.

Product Application

Product Application

Product Application

 

Product Selection

 

When requesting an XHG06 gearbox, provide the intended ratio, required continuous torque, peak load requirement, input speed and PTO shaft arrangement. Include the machine interface drawing so that the mounting and shaft connections can be matched to the surrounding assembly. Select the torque combination as a complete pair and use the dimensional drawing alongside the specification table when reviewing the installation envelope.

 

Frequently Asked Questions

 

Q: What is the maximum input speed?

A: The maximum input speed for the XHG06 is 1,000 rpm.

Q: Which PTO shaft arrangements are available?

A: The XHG06 family includes single and double PTO shaft arrangements with a 1 3/4-inch, 20-tooth shaft specification.

Q: Which torque rating should an XHG06 evaluation unit have?

A: Describe normal load and peak load separately. Identify whether the 30,000 and 60,000 N·m pair or the 40,000 and 80,000 N·m pair is under evaluation, and state the required ratio.

Q: What should an OEM provide for a large vertical or biogas mixer?

A: Share the drive layout, expected load cycle and input speed. Show whether power must continue through a second PTO connection in the proposed assembly.

Q: Can I request an XHG06 shaft layout for a twin PTO installation?

A: Send the drivetrain drawing showing both connection positions and the required shaft interfaces. Confirm which listed configuration meets the layout and request review of any changes.

Q: What should a test request say about the two torque ratings?

A: Specify whether the requested test concerns continuous or peak load. State the load, duration and acceptance criteria, then confirm the available test scope before ordering.

Q: What should I send if an XHG06 develops vibration?

A: Provide the configuration code, PTO arrangement, operating speed and the load at which vibration occurs. Photos of the mounting and shaft alignment can help with the initial review.

 

Outline and Mounting Dimensions

 

Outline and Mounting Dimensions

 

XHG06 Product Dimensions and Ratings

 

 

XHG06 Product Dimensions and Ratings

 

 

 

Hot Tags: tmr vertical mixer gearbox, China, manufacturers, suppliers, factory, wholesale, quotation, bulk, made in China

Send Inquiry