Gearbox For Mower

Gearbox For Mower
Details:
The XH27 is documented for post hole digger applications. Its catalogue configuration XH27.318J.00W has a 3.18:1 ratio, a 540 rpm input and a 27 HP rating. The technical sheet identifies a 1 3/8 inch six-spline input and shows the mounting and output details used to connect the gearbox to the drilling implement.
The configuration drawing defines the input shaft, mounting geometry and output connection as parts of the post hole digger transmission. Use the complete XH27.318J.00W reference when requesting a fit review or order drawing. This allows the gearbox arrangement to be compared with the implement bracket and connected drilling components before a new machine specification or replacement selection is finalized.
Send Inquiry
Description
Send Inquiry

Key Features

 

  • The catalogue identifies the gearbox specifically for post hole diggers.
  • The documented input condition is 27 HP at 540 rpm.
  • The original sheet includes the mounting geometry and output connection.

 

Product Applications

 

XH27 is intended for the transmission of a post hole digger as shown in the catalogue application image. Its mounting and shaft interfaces should be compared with the implement frame and connected drilling components. Neither the power rating nor the family number specifies an auger diameter, drilling depth or soil capability for a complete machine. Those implement requirements should be included in an equipment selection enquiry.

 

Technical Specifications

 

Parameter

Catalogue configuration

Model

XH27.318J.00W

Website reference

XH27.318J.00

Application

Post hole digger

Input power

27 HP

Input speed

540 rpm

Ratio

3.18:1

X spline

1 3/8 inch Z6

Website weight

30 kg

Dimensional and other source data

The complete original technical sheet is embedded below

 

Product Design

 

  • The dimensioned views show the relationship between the input housing, mounting points and output connection. The 3.18:1 ratio is retained in the same notation as the source. The separate input and output details provide the basis for checking fit within the post hole digger transmission.
  • The original technical sheet is reproduced in full to retain all source annotations. Application selection and any torque-specific requirement should be addressed using the complete configuration code.

 

Original Technical Sheet

 

PDF page 10 | Configuration codes and dimensions remain as published:

product-1684-2382

 

Frequently Asked Questions

 

Q: What should a post hole digger sample enquiry identify?

A: Quote XH27.318J.00W and supply the existing gearbox marking and implement mounting drawing. This distinguishes the catalogue drilling arrangement from the shortened code used on the website page.

Q: Which information does an OEM need beyond 27 HP?

A: Provide the input spline, mounting bracket, output connection and intended operating duty. The catalogue power figure describes the gearbox input condition and does not define the complete drilling implement.

Q: Can an alternative output connection be reviewed?

A: Submit the required connection profile and mating part drawing as a customization enquiry. The approved arrangement should be identified in a configuration drawing rather than inferred from the standard external view.

Q: What should be checked before fitting an evaluation unit?

A: Compare the code, input spline and mounting dimensions with the implement. If a functional or torque test is required, state the intended test conditions and acceptance criteria in the sample evaluation requirements.

Q: What helps with technical support after installation?

A: Send the gearbox identification, actual input speed and photographs of the bracket and output connection. Describe when the issue occurs and include the connected implement details for a configuration-specific review.

 

Enquiry Information

Include the complete model and configuration, machine application, selected ratio, input speed and mating component drawings with an enquiry. Sample supply, OEM identification, customization scope, inspection documents and service arrangements are addressed in the quotation or order agreement for the specified configuration.

 

                  

 

Hot Tags: gearbox for mower, China, manufacturers, suppliers, factory, wholesale, quotation, bulk, made in China

Send Inquiry