Agricultural Sprayer Gearbox

Agricultural Sprayer Gearbox
Details:
The XHG04 Hydroseeding Machine Gearbox is a mechanical transmission unit for hydroseeding equipment. It provides selectable transmission positions with a 540 rpm input and a 1 3/8-inch, six-spline PTO shaft connection. Position I is specified at 1:1, a neutral position is identified as 0, and position II is listed with ratios of 1.85 and 1.98. The model has a continuous torque rating of 1,500 N·m and a peak torque rating of 2,500 N·m for assessing the load requirements of the equipment drivetrain.
Send Inquiry
Description
Send Inquiry

Key Features

 

Selectable transmission positions: the position I, neutral and position II arrangement provides distinct operating selections within the hydroseeding machine transmission.

Ratio choices for equipment matching: position I uses 1:1, while the listed position II ratios are 1.85 and 1.98, supporting selection around the machine's required transmission relationship.

Defined PTO interface: the 1 3/8-inch z6 shaft specification identifies the connection diameter and six-spline arrangement for mating driveline selection.

Separate torque specifications: a 1,500 N·m continuous rating and a 2,500 N·m peak rating provide distinct references for normal working and maximum load assessment.

 

Technical Specifications

 

Parameter

Specification

Model

XHG04

Gearbox type

Bevel transmission gearbox

Continuous torque

1,500 N·m

Peak torque

2,500 N·m

Transmission positions

I: 1:1; neutral: 0; II: 1.85 / 1.98

Input speed

540 rpm

PTO shaft

1 3/8 inch z6

 

Applications

 

XHG04 is intended for hydroseeding machine transmission applications. Its role is to transmit mechanical drive through the selected transmission position. Equipment designers can assess the gearbox against the intended input speed, required drive ratio and machine load, then use the product drawing to review its physical relationship with the surrounding equipment.

 

Product Application

 

The XHG04 serves as a transmission unit in hydroseeding equipment. In this application, it is installed in the equipment drive so that input power can be passed through the selected transmission position to the driven machine mechanism. Its catalogue specifies a 540 rpm input, position I at 1:1, a neutral position and two position II ratios. These choices allow equipment designers to account for the required drive relationship when integrating the gearbox. The outline drawing can be used to review mounting space and the relationship between the input and output connections.

 

Product Selection

 

Specify XHG04 together with the required position II ratio when preparing an enquiry. Include the machine's drive arrangement, input speed, continuous load and peak load requirement. The dimensional drawing provides the reference for reviewing shaft connections and the mounting layout. The transmission position designations and ratio values should be carried into the machine specification so that the selected gearbox arrangement is clearly identified throughout purchasing and integration.

 

Frequently Asked Questions

 

Q: Which transmission positions are specified?

A: The positions are I at 1:1, neutral at 0, and II with listed ratios of 1.85 and 1.98.

Q: What input connection does XHG04 use?

A: The input speed is 540 rpm, with a 1 3/8-inch z6 PTO shaft connection.

Q: What are the torque ratings?

A: The continuous torque rating is 1,500 N·m, and the peak torque rating is 2,500 N·m.

Q: How should I specify an XHG04 sample for a hydroseeding machine?

A: Provide the driven mechanism, the 540 rpm input arrangement and whether the trial requires the 1.85 or 1.98 position II ratio. Confirm sample availability for that configuration.

Q: What drawings should a hydroseeder OEM submit?

A: Send a layout showing mounting surfaces, shaft locations and clearance for the selector. Mark the input and output connections on the drawing.

Q: Can the selector interface be changed for my hydroseeder?

A: Show the proposed linkage, required travel and available clearance. Request a feasibility review against the catalogue selector arrangement.

Q: What can I specify for a hydroseeder transmission inspection?

A: Identify the shaft and mounting dimensions to verify. If transmission positions must be checked, specify which positions and whether a written result is needed.

Q: What details help when a hydroseeder loses drive?

A: Report the selected transmission position, input speed and symptoms at the driven mechanism. Include the model identification and photos of both connections.

 

Outline and Mounting Dimensions

 

image001

 

 

XHG04 Product Dimensions and Ratings

 

 

product-815-1152

 

Hot Tags: agricultural sprayer gearbox, China, manufacturers, suppliers, factory, wholesale, quotation, bulk, made in China

Send Inquiry