Vertical Mixer Transmission Gearbox

Vertical Mixer Transmission Gearbox
Details:
The XHG02 Vertical Mixer Transmission Gearbox is a front transmission unit for TMR feed mixing equipment. It occupies a different position in the mixer drive from the auger reduction gearbox: its role is to provide transmission ratio selection within the incoming power path. This makes the XHG02 relevant when specifying the transmission arrangement of a vertical feed mixer.
The model has a continuous torque rating of 1,500 N·m and a peak torque rating of 2,500 N·m. Its transmission positions comprise position I at 1:1, a neutral position marked 0, and position II with ratio alternatives of 1.4, 1.5, 1.8, 1.9 and 2.4. The range therefore combines a direct ratio position with alternative ratio selections in the same model family.
Send Inquiry
Description
Send Inquiry

Key Features

 

  • Front transmission application: XHG02 is specified for the incoming transmission arrangement of vertical TMR mixer equipment, supporting selection of the mixer drive ratio.
  • Defined transmission positions: position I, neutral and position II provide a clear description of the transmission arrangement for equipment specification and ordering.
  • Separate duty ratings: the 1,500 N·m continuous torque rating and 2,500 N·m peak torque rating describe distinct operating load categories.
  • PTO interfaces: the model lists 1 3/4-inch z20 and 1 3/8-inch z6 shaft connections, with an input speed specification of 1,000 rpm.

 

Technical Specifications

 

Parameter

Specification

Model

XHG02

Gearbox type

Front mounted transmission gearbox

Continuous torque

1,500 N·m

Peak torque

2,500 N·m

Transmission positions

I: 1:1; neutral: 0; II: 1.4 / 1.5 / 1.8 / 1.9 / 2.4

Input speed

1,000 rpm

PTO shafts

1 3/4 inch z20 and 1 3/8 inch z6

Recommended maximum mixer capacity

15 m³

 

Configuration Codes

 

XHG02.51000.00; XHG02.51000.01; XHG02.51000.02; XHG02.51000.03; XHG02.51000.04; XHG02.51000.05; XHG02.51000.06

 

 

Applications

 

XHG02 is intended for the front transmission of agricultural TMR mixers, with a recommended maximum mixer capacity of 15 m³ in the model selection range. It is relevant to machine builders specifying the power path ahead of the mixer reduction drive and to replacement enquiries where the existing front transmission is identified as XHG02. The gearbox is selected as part of the complete machine transmission arrangement.

 

Product Application

product-1110-735
product-1110-735
product-1110-735
product-1110-735

The XHG02 is applied at the front transmission position of a vertical TMR feed mixer. It forms part of the power path between the incoming drive and the downstream mixer drive, allowing the machine builder to specify a transmission position and ratio that suit the mixer arrangement. The catalogue lists position I, neutral and position II options, with several ratios available for position II. It also gives a recommended maximum mixer capacity of 15 m³. This makes the XHG02 relevant when laying out or replacing the front transmission unit in a mixer system.

 

Product Selection

 

When discussing an XHG02 installation, identify the required transmission position and ratio, the incoming shaft connection and the connection to the downstream drive. For replacement supply, include the full configuration code and the machine's mounting dimensions. This information distinguishes the required XHG02 configuration from other front transmissions and from the gearbox driving the mixing auger itself.

 

Frequently Asked Questions

 

Q: Is XHG02 an auger reduction gearbox?

A: XHG02 is a front transmission gearbox for the mixer power path. Its application and torque ratings should be considered in that position within the machine.

Q: What information identifies the ratio arrangement?

A: Specify the required position and ratio together with the complete XHG02 configuration code so that the gearbox description corresponds to the intended transmission arrangement.

Q: Can a sample be evaluated in an existing front transmission?

A: Provide the existing code, photos of both shaft connections and the required position II ratio. Confirm that the trial unit matches the front transmission arrangement.

Q: What should an OEM specify about positions I, neutral and II?

A: Show where the XHG02 sits in the power path and identify the required drive behavior in each position. Include the interface to the downstream reduction stage.

Q: How do I enquire about a different position II ratio?

A: State the target ratio and operating speed and include the existing configuration code. Confirm whether a listed ratio is suitable or a special design review is needed.

Q: Can position and ratio checks be included in acceptance?

A: Ask whether the requested check can document position I, neutral and the specified position II ratio. Agree on the check method and report format before ordering.

Q: What information helps diagnose a position selection issue?

A: Report which position is affected, whether the unit was loaded, and how the selector linkage is installed. Include the full configuration code and a photo of the linkage.

 

Outline and Mounting Dimensions

 

mtxx01

 

XHG02 Product Dimensions and Ratings

 

product-815-1152

 

Hot Tags: vertical mixer transmission gearbox, China, manufacturers, suppliers, factory, wholesale, quotation, bulk, made in China

Send Inquiry