TMR Feed Mixer Gearbox

TMR Feed Mixer Gearbox
Details:
The XHG01 TMR Feed Mixer Gearbox is a vertical planetary reduction gearbox for agricultural feed mixing equipment. It transfers power to the mixer auger through a reduction drive, providing the lower rotational speed and output torque required by the mixing mechanism. Its vertical arrangement makes it a gearbox option for machines built around upright mixing augers.
The XHG01 family includes continuous torque options of 18,000 and 22,000 N·m, paired with peak torque ratings of 30,000 and 36,000 N·m respectively. The family transmission ratio range is 6–90.46, with a maximum input speed of 1,000 rpm. These specifications allow selection within the XHG01 model according to the drive arrangement and mixing duty, while keeping the distinction between continuous operation and peak loading clear.
Send Inquiry
Description
Send Inquiry

Key Features

 

  • Vertical planetary transmission: the gearbox combines a vertical installation arrangement with planetary reduction for the drive of TMR feed mixer augers.
  • Two torque rating pairs: 18,000/30,000 N·m and 22,000/36,000 N·m identify the continuous and peak torque alternatives within the model family.
  • Ratio selection within one model: the 6–90.46 family range provides a basis for matching input rotation to the speed required by the mixer drive.
  • PTO connection alternatives: single and double PTO shaft arrangements are listed, with a 1 3/4-inch z20 shaft specification.

 

Technical Specifications

 

Parameter

Specification

Model

XHG01

Gearbox type

Vertical planetary gearbox

Continuous torque options

18,000 / 22,000 N·m

Peak torque options

30,000 / 36,000 N·m, respectively

Transmission ratio range

6–90.46

Maximum input speed

1,000 rpm

PTO shafts

single / double; 1 3/4 inch z20

Recommended mixer capacity

Single auger: 12 / 15 m³; two augers: 24 / 30 m³; three augers: 36 / 45 m³

 

Configuration Codes

 

XHG01.51000.00; XHG01.51000.01; XHG01.51000.02; XHG01.51000.03; XHG01.51000.04; XHG01.51000.05; XHG01.51000.06; XHG01.51000.07; XHG01.51000.08; XHG01.51000.09

 

 

Applications

 

XHG01 is used in vertical TMR feed mixers and biogas machines. The model selection range includes single-auger machines of 12 or 15 m³, twin-auger machines of 24 or 30 m³, and three-auger machines of 36 or 45 m³. These machine categories describe the application range of the gearbox family; the drive layout and duty requirements determine the configuration for each mixer.

 

Applications
Applications
 

 

Product Application

 

In a vertical TMR mixer, the XHG01 connects the machine drive to the upright auger system. The planetary reduction unit lowers input speed and supplies the output torque used to turn the mixing augers as feed ingredients are blended. Its model range covers single, twin and three-auger mixer layouts, with catalogue capacity references extending from 12 to 45 m³ across these arrangements. The gearbox selection is made with the mixer layout, drive speed and required ratio in view. The catalogue also identifies biogas mixing as an application for the XHG01 family.

 

Product Selection

 

For an XHG01 enquiry, provide the mixer capacity, number of augers, drive input speed, required ratio and torque requirement. Include the existing gearbox code for a replacement enquiry, together with the shaft connection and mounting dimensions. The dimensional drawing provides the mounting and interface information needed to discuss integration with the mixer manufacturer.

 

 

Frequently Asked Questions

 

Q: Which transmission ratios does XHG01 offer?

A: The XHG01 model has a transmission ratio range of 6–90.46, with single or double PTO shaft arrangements.

Q: Which torque figure should be used when comparing options?

A: Compare continuous torque with continuous torque and peak torque with peak torque. XHG01 lists each continuous rating alongside its corresponding peak rating.

Q: What should a sample represent on a multi-auger TMR mixer?

A: Identify the auger position, required ratio and whether the drivetrain calls for a single or double PTO arrangement. Confirm the sample configuration before ordering.

Q: How should an OEM specify XHG01 across a mixer range?

A: Provide a schedule of mixer capacities, auger counts and loads. Identify the required ratio and continuous and peak torque pair for each layout.

Q: Can the PTO arrangement be adapted for a biogas mixer?

A: Send the proposed shaft layout and identify which connections are required. Confirm whether a listed arrangement fits or an engineering review is needed.

Q: Which checks are useful for an XHG01 trial installation?

A: Agree on the flange fit, shaft interface and ratio verification needed for the trial, and specify any inspection records in the enquiry.

Q: What should I report if an auger stalls under load?

A: Provide the nameplate, auger position, material load and the operating conditions at the time of the stall so the drive configuration can be reviewed.

 

Outline and Mounting Dimensions

 

product-800-537

mtxx02

 

product-815-1152

 
 

Hot Tags: tmr feed mixer gearbox, China, manufacturers, suppliers, factory, wholesale, quotation, bulk, made in China

Send Inquiry