What should be paid attention to when working with pneumatic mixer? Let me introduce you to the following, I hope our introduction can help you better
1. Compressed air is used as the power source, and it is equipped with explosion-proof air motor. It will not spark for a long time, and it will not generate static electricity. It has good explosion-proof performance.
2. The air motor can be adjusted steplessly. By controlling the flow of compressed air, the output power and speed of the motor can be adjusted. So as to achieve the purpose of adjusting the speed and power.
3. The air motor can realize forward and reverse rotation. As long as the intake direction is changed, the forward and reverse rotation of the output shaft of the air motor can be achieved, and instantaneous commutation is possible. In the forward and reverse conversion, the impact force is very small. A major advantage of the air motor commutation operation is its ability to rise to full speed almost instantaneously. The manufacturer of vane air horse pneumatic mixer can reach full speed in one and a half times; piston air motor can reach full speed in less than one second. By using the control valve to change the direction of intake air, it can achieve forward and reverse rotation. The time to achieve positive and negative reversal is short, the speed is fast, the impact is small, and there is no need to unload.
4. It is not affected by vibration, high temperature, electromagnetic, radiation, etc. It is suitable for harsh working environment and can work normally under adverse conditions such as flammable, explosive, high temperature, vibration, humidity, dust, etc.
5. With overload protection function, it will not fail due to overload. When the overload occurs, the motor only reduces or stops the speed. When the overload is removed, the motor can immediately resume normal operation without damage to the machine. It can run continuously at full load for a long time, and the temperature rise is small.
6. With a high starting torque, it can be directly started by the load of the pneumatic mixer manufacturer. Start and stop are rapid. Can start with load. Start and stop quickly.
7. The power range and speed range are wider. The power is as small as several hundred watts, as large as tens of thousands of watts; the speed can be from zero to ten thousand revolutions per minute.
8. Convenient operation, easy maintenance and repair The gas motor has a simple structure, small size, light weight, high horsepower, easy operation and convenient maintenance
What are the maintenance techniques of pneumatic mixer? Many customers and friends may not be very clear when using it. Let me introduce you today
1. Determine the steering, torque and speed before use, and it is strictly prohibited to adjust during rotation.
2. Do not touch the pneumatic mixer head with hard objects during use.
3. Handle gently during use and do not bump.
4. Pneumatic mixer manufacturers regularly check and maintain; keep the surface clean.
5. Be careful when replacing the batch head, not to damage other mechanical parts.
6. Before using the pneumatic mixer for a long time, it must be lubricated with oil, or the pneumatic mixer will be damaged. Used to lubricate and save before work.
7. Before using the manual oiler to lubricate, disconnect the pneumatic mixer and the air pressure tube, then add the lubricating oil (# 30- # 60) to the intake nut, connect the pneumatic mixer and the air pressure tube, and press the pressure handle switch to idle Lubrication and storage can be completed in about two seconds. 1-2 times a day can extend tool life.
8. Keep the air source clean and free of water. Before starting work on each shift, the water collector must be checked and drained. After work, the pneumatic mixer should be removed and lubricated and placed in the tool cabinet. It is strictly forbidden to drain with an air mixer.
