Pneumatic mixer horizontal plate type and has the characteristics

Do you know what the horizontal plate type of pneumatic mixer is?

1. The advantage of the horizontal plate type pneumatic mixer is that it can be quickly changed into other barrels. One machine is versatile. Compared with the pneumatic lifting mixer, the horizontal plate type mixer is more compact and convenient, easy to move, and saves equipment costs. Compared with the portable pneumatic mixer, it can save labor costs, and can also use a high-power, heavy-weight piston air motor

2. The horizontal-plate pneumatic agitator itself is customized with the size of the barrel, the size of the horizontal-plate agitator of different sizes, the air motors of different powers, the mixing shafts of different sizes and the pneumatic stirring blades. The handle is convenient to move, the whole structure design is beautiful and convenient; both sides of the horizontal plate can be fixedly adjusted according to the size of the barrel to prevent displacement during work

1. Stepless speed regulation: As long as the opening of the intake valve or exhaust valve is controlled, that is, the flow of compressed air, the output power and speed of the motor can be adjusted. You can achieve the purpose of adjusting the speed and power.

2. It can rotate forward or reverse: Most air motors and air motors can achieve forward and reverse rotation of the output shaft of the air motor by simply using the control valve to change the motor inlet and exhaust directions, and can be instantaneously reversed. . When switching between forward and reverse, the impact is small. A major advantage of the air motor commutation operation is its ability to rise to full speed almost instantaneously.

3. The vane air motor can be raised to full speed in one and a half times; the piston air motor can be raised to full speed in less than one second. By using the control valve to change the direction of intake air, it can achieve forward and reverse rotation. The time to achieve positive and negative reversal is short, the speed is fast, the impact is small, and there is no need to unload. Work safety, not affected by vibration, high temperature, electromagnetic, radiation, etc., suitable for harsh working environment, can work normally under adverse conditions such as flammable, explosive, high temperature, vibration, humidity, dust and so on.

4. It has overload protection function and will not fail due to overload: when overloading, the motor just reduces or stops the speed. When the overload is lifted, it can immediately resume normal operation without damage to the machine. It can run continuously at full load for a long time, and the temperature rise is small. Air motor manufacturers

5. With high starting torque, it can be started directly with load: start and stop quickly. Can start with load. Start and stop quickly.

6. The power range and rotation speed range are wide: the power is as small as several hundred watts, as large as tens of thousands of watts; the rotation speed can be from zero to ten thousand revolutions per minute.

7. Convenient operation, easy maintenance and repair: the air motor has a simple structure, small size, light weight, high horsepower, easy operation and convenient maintenance.

8. Use air as the medium: no supply difficulties, used air does not need to be processed, and it can be supplied centrally in the atmosphere without pollution. Compressed air can be supplied centrally. For long-distance transportation, the air motor has many characteristics above, so it can be used in wet, Work in harsh environments such as high temperature and high dust

1. Pneumatic actuator that converts the pressure energy of compressed gas into mechanical energy and generates rotational motion in pneumatic transmission. The commonly used pneumatic motor is a volumetric air motor, which uses the volume change of the working chamber to perform work, and is divided into blade type, piston type and gear type. The picture shows a schematic diagram of a vane air motor. The pneumatic rotor is installed in the eccentric stator. The blade is installed in the radial slot of the rotor, and the bottom is equipped with a spring, which divides the space between the stator and the rotor into many small air cells.

2. When the compressed gas enters the air chamber from the inlet A, the rotor is driven to rotate, the exhaust gas is discharged from the exhaust port C, and the residual gas is discharged from the outlet B. The rotational speed of the vane type air motor is 0 ～ 25000 rpm, the working pressure is 0.4 ～ 0.8 MPa, and the power is 0.6 ～ 18 kW. Stepless speed regulation can be achieved by changing the input flow. The directional control valve can control the positive and negative rotation of the air motor, with a fast speed-up and overload protection.

3. Pneumatic motors can be used in places such as humidity, high temperature, explosion-proof, fire prevention, frequent starting, starting with load, frequent change of direction and stepless speed regulation. Various special tools can be made by attaching special tools to the blade-type air motor shaft. If the air motor is used as the main drive of the pneumatic power head, it can be used for drilling, countersinking, reaming, grinding and tapping. Dozens of pneumatic power heads can be arranged on the pneumatic combination machine tool for aircraft, automobile and instrument manufacturing at the same time.